1995 Mori Seiki CL-25

1995 Mori Seiki CL-25

$15,500 (USD)
Helena, AL

12” Chuck (no Jaws) 10 Position Turret Approx 3” Bar Capacity Equipped with: Chip Conveyor Fanuc Control Leveling Pads Machine Manuals 2 Boring Bar Holders (Boring Bars Not Included) 1 Facing Tool ...

2001 OKK VM7 Vertical Machining Center

2001 OKK VM7 Vertical Machining Center

$31,499 (USD)
Helena, AL

"Used" 2001 OKK VM7 Vertical Machining Center. CAT-50 Spindle. Dual Chip Augers With Magnetic Chip Conveyor. Coolant System With Wash Down Gun. 20 Station Automatic Tool Changer. Oil Cooler For Spi...

2004 Citizen  C-16 VII Swiss Lathe

2004 Citizen C-16 VII Swiss Lathe

$39,900 (USD)
Helena, AL

Number of Axes: 7 Number of Spindles: 2 Max. Machining Diameter: 0.63" Max. Machining Length: 8" Sub-spindle Stroke: 3.54" Main Spindle Speed: 200 - 10,000 RPM Main Spindle Motor: 10 HP Turning Too...

Resner Model I/O 3 Heavy Duty Hydraulic Tube End Former and Sizer

Resner Model I/O 3 Heavy Duty Hydraulic Tube End Former and Sizer

$9,500 (USD)
Helena, AL

MODEL: I/O 3 SPECIFICATIONS: Max. Diameter ..................... 3" O.D. x 13 Ga. Min. Diameter ..................... 1/2" O.D. x 13 Ga. Max. Work Length (approximate) .... 4" Min. Diameter Expansi...

1994 Sunnen EC 3500D Horizontal Honning Machine

1994 Sunnen EC 3500D Horizontal Honning Machine

$15,900 (USD)
Helena, AL

Model: EC 3500D S/N: 1X1-1964 Year: 1964 INTERNAL WORK DIAMETER RANGE: MANUAL ---------------------------------- .060" TO 6.5" WITH POWER STROKING --------------------- .060" TO 4" AUTOMATIC SIZING...

Cincinnati-Bickford Radial Drill | 5' x 15" #6 MT, Rapid Traverse, Power Clamping

Cincinnati-Bickford Radial Drill | 5' x 15" #6 MT, Rapid Traverse, Power Clamping

$4,500 (USD)
Helena, AL

Arm: 7' Column: 15" Spindle taper #6 MT Speeds: 18 to 1,124 RPM Feed in Thousandths: 6 to 125 Threads Per Inch: 8, 11.5, 14 Motor: 7.5 HP 3 Phase Capacity in Steel: 23/4" Equipped with: Rapid Trave...

Cincinnati Radial Drill | 3' x 7'

Cincinnati Radial Drill | 3' x 7'

$2,100 (USD)
Helena, AL

YouTube Video: Specifications: Drilling Capacity...................................1" Cast Iron Tapping Capacity....................................SAE 3/4" Cast Iron Spindle . 3 Morse Taper Diamet...

Niles Engine Lathe | 56" x 276"

Niles Engine Lathe | 56" x 276"

$34,500 (USD)
Helena, AL

Specifications: Swing Over Bed: .................................................................. 56" Distance Between Centers:.....................................................276" Spindle Spe...

Costello Tube/Pipe bender | 6"

Costello Tube/Pipe bender | 6"

$1,250 (USD)
Helena, AL

SPECIFICATIONS: The die on the machine & the extra one in the box are about 2". The bar on the machine is about 2". The circle disc are approximately 1", 1.5", 2.5" & 4.5". Freight charges are not ...

1976 Summit VBM | 59" 4 Jaw Chuck, 70" Swing, 47"UR, Ram, Turret & Side Heads

1976 Summit VBM | 59" 4 Jaw Chuck, 70" Swing, 47"UR, Ram, Turret & Side Heads

$55,000 (USD)
Helena, AL

S/N:15A-361 Year: 1976 (approx) CATALOGUE SPECIFICATIONS: Table Diameter......................................... 59" Swing Maximum, w/o Side Head........................... 70" Swing Maximum, w/Si...