90" FRORIEP VBM, Two Ram Heads, 90" 4-Jaw Chuck, 95" Swing, 70" UR, Side Head

90" FRORIEP VBM, Two Ram Heads, 90" 4-Jaw Chuck, 95" Swing, 70" UR, Side Head

$69,500 (USD)
Helena, AL

Table Diameter: 90.55" Max. Swing: 95" Ram Stroke: 56" Height Under Crossrail: 70" Height Under the Ram: 63" Swivel of Ram: 30/ 45 Degrees Table Speeds: 12 - 36 RPM Feed Rates: 0.0098 - 0.4724 IPM ...

5" GIDDINGS & LEWIS 350F FLOOR TYPE HBM, 12'x, 11'y, 1955

5" GIDDINGS & LEWIS 350F FLOOR TYPE HBM, 12'x, 11'y, 1955

$19,500 (USD)
Helena, AL

Spindle Diameter: 5" Vertical Travel: 11' Horizontal Travel: 12' Spindle Taper: #5 MT Sub-Spindle: 2" MT Main Feed: 0.005 - 0.250 Aux Feed: 0.001 - 0.062 Motor: 20 HP

4" GIDDINGS & LEWIS MODEL 65E4T, 48"x98" Tbl, 84"X, 48"Y, 32"Z, 50NST, 1963

4" GIDDINGS & LEWIS MODEL 65E4T, 48"x98" Tbl, 84"X, 48"Y, 32"Z, 50NST, 1963

$15,000 (USD)
Helena, AL

Diameter of Spindle Bar: 4" Table Size: 48" x 98" Taper in Spindle: #50 Table Cross Feed: 84" Spindle-Head Vertical Travel: 48" Spindle In-Out Travel: 32" Spindle Speeds: 7 - 1,300 RPM Feeds: 73 - ...

46" BULLARD DYNATROL, 40"UR, 3-Jaw,Turret, Ram & Side Head, 1967

46" BULLARD DYNATROL, 40"UR, 3-Jaw,Turret, Ram & Side Head, 1967

$22,500 (USD)
Helena, AL

SPECIFICATIONS: Chuck Diameter: 46" Max. Swing with Side Head in Position: 49" Max. Swing with Side Head Below Table: 58" Chuck Speeds: 20 from 9 to 313 RPM Feed Range: Variable 0.001 to 250 IPR M...

234" NILES, No. A2-168, 168" 4-Jaw Table,(2) Rams, PLC Electrics

234" NILES, No. A2-168, 168" 4-Jaw Table,(2) Rams, PLC Electrics

$199,500 (USD)
Houston, TX

Table Diameter (4-Jaw): 168" Max Swing: 234" Height Under Rail: 108" Speeds (variable): 0 - 27 RPM Ram Travel: 60" Ram Swivel: 45 Degrees Motor( 280 VDC): 75 HP Table Weight Capacity (Est.): 40 - 5...

4" GIDDINGS & LEWIS FRASER Model 70A-DP4-T Horizontal Boring Mill

4" GIDDINGS & LEWIS FRASER Model 70A-DP4-T Horizontal Boring Mill

$49,500 (USD)
Helena, AL

Model: 70A-DP4-T Year: 1968 Manufactured in: Scotland Spindle...............................4" Spindle Taper.........................50 NST Table.................................36" x 72" Spindle T...

Ezio Pensotti SVF1600

Ezio Pensotti SVF1600

$26,900 (USD)
Helena, AL

57" Ezio Pensotti Made in Italy. 4-jaw chuck

Dabrowska 43" VTL         KNA-110/135B

Dabrowska 43" VTL KNA-110/135B

$26,900 (USD)
Helena, AL

43" VTL Dabrowska Fabryka Made in Poland Serial# 0282-7333

7" Giddings & Lewis HBM, 72" x 96" CSRT, 150" X, 93" Y, #7MT, 3 Axis DRO, 1947

7" Giddings & Lewis HBM, 72" x 96" CSRT, 150" X, 93" Y, #7MT, 3 Axis DRO, 1947

$49,500 (USD)
Helena, AL

Spindle.................7" Taper....................7 MT Aux Spindle..........1-1/2" Cross Sliding Rotary Table.............72" x 96" Cross Travel (X)............................ 150" Vertical Trav...

59" SUMMIT VBM, 59" 4 Jaw Chuck, 70" Swing, 47"UR, Ram, Turret & Side Heads,1976

59" SUMMIT VBM, 59" 4 Jaw Chuck, 70" Swing, 47"UR, Ram, Turret & Side Heads,1976

$55,000 (USD)
Helena, AL

S/N:15A-361 Year: 1976 (approx) CATALOGUE SPECIFICATIONS: Table Diameter......................................... 59" Swing Maximum, w/o Side Head........................... 70" Swing Maximum, w/Si...